Protype CD400
Industrial 3D Printing
Industrial IDEX 3D printer with open material architecture. Predictable production of engineering parts 24/7, dramatically reduced cost per part, and technological independence.
Factors limiting additive manufacturing efficiency
Closed Materials
Part cost is 5-10x higher. Lock-in to proprietary cartridges inflates economics during the operational phase.
Low Throughput
Equipment is occupied 20+ hours by a single part. R&D queue and production downtime. A second printer is needed.
Passive Chamber Heating
Thermal deformation of parts, geometry distortion, delamination, and increased defect rates.
Manual Filament Change
An operator must manage material changes. The printer sits idle during off-hours — production stops.
Protype CD400 — Industrial IDEX 3D Printer
Two independent extruders, active thermal chamber, and a fully open material system.
CD400 — Built for Production
Manage your fleet from phone or computer
ProtypeHub — a unified application for monitoring and managing all printers. Works via secure VPN from anywhere in the world.
Dashboard — temperatures, print status, real-time graphs
FilaCore — spool management, auto-change, filament remaining
VPN — secure access without static IP, one-click connection
ProtypeVPN — Secure Remote Access System
Encrypted channel for equipment management without compromising the corporate network.
- Plug & Play — plug in the printer and everything works out of the box
- Remote Control — from the office, home, or another facility
- Network Protected — corporate network remains fully closed
- Fast Scaling — connect new printers in minutes
- Single Access Point — scale your fleet across branches with one entry point
- Invisible from Internet — all traffic is encrypted end-to-end
ProtypeVPN provides a secure way to manage production without violating company security policies. Suitable for defense sector and air-gapped networks.
ProtypeHub: All Printers in One Window
Desktop application for macOS / Windows / Linux. No cloud, no open external ports.
- Centralized Management — all printers in a single interface
- Job Submission — upload and print in a couple of clicks
- Real-time Monitoring — status, queue, print history
- Camera and Alerts — 24/7 monitoring from anywhere
ProtypeOS — Proprietary OS
Unified interface on a 22" touchscreen for full print control.
Built-in Slicer
Prepare models and start printing directly from the printer.
Material Profiles
Ready-made settings for ABS, PA, PC, TPU and more.
Queue and Log
Task distribution and complete history.
Remote Access
LAN/Wi-Fi — upload models without USB drives.
Roles and Permissions
Operator, engineer, manager.
Logging
Full traceability for every part.
Enclosed Thermal Chamber for Stable Printing
For ABS, Nylon, PC, ASA — a stable chamber temperature means no warping and predictable part geometry.
Active heating maintains stable temperature and minimizes the impact of the external environment.
Designed for prolonged operation at chamber temperatures up to 90 °C without wear.
Reduces heat loss through walls and chamber doors, maintaining stable operating conditions.
Automatic leveling, uniform heating — minimal warping across the entire area.
Full Technical Specifications
| Hotend temperature | up to 550°C |
| Nozzle diameter | 0.3–1.2 mm |
| Print speed | up to 300 mm/s |
| Volumetric flow rate | up to 60 mm³/s |
| XY/Z accuracy | 5 μm / 2 μm |
| Layer thickness | 0.05–0.75 mm |
| Print volume | 400×400×400 mm |
| Chamber temperature | up to 90°C |
| Bed temperature | up to 150°C |
| Bed surface | Tempered glass |
| Auto-calibration | Yes |
| IDEX | 2 independent heads |
| Modes | Copy / Mirror |
| Auto-change | 4×3 kg |
| Auto nozzle cleaning | Yes |
| Unattended operation | up to 10+ days |
| Monitoring camera | Built-in |
| Drying chambers | 2×up to 80°C |
| Humidity sensor | Yes |
| Active ventilation | Yes |
| Standard | ABS, PET-G, HIPS, TPU |
| Engineering | PA-6, PA-12, PC, ASA |
| Composite | PA-CF, ABS-CF, CARBEX |
| Display | 22" touch HMI |
| ProtypeOS | LAN, Wi-Fi, VPN |
| Dimensions | 1900×770×920 mm |
| Weight / Power | 380 kg / 4500 W |
| Warranty | 12 months |
Installation Requirements
No special conditions needed: we reduced the footprint while preserving full chamber volume.
Floor
Level and stable. Doorway ≥ 80 cm (dimensions: 1,900 x 770 x 920 mm).
Electrical
220 V, 50 Hz; dedicated line with grounding; peak power up to 4.5 kW; separate outlet for dryer.
EMI / Interference
Keep away (≥ 1-2 m) from power equipment and cables to avoid interference.
Access and Climate
~50 cm clearance for maintenance; standard ventilation is sufficient.
The printer fits easily in an office and can be transported in a standard elevator
ROI of 3D Manufacturing
3D printing is an investment asset, not an expense. With a baseline volume of 250 parts per year, equipment pays for itself in 6-12 months.
One operator, one connection point, one software license — but 2x more finished products per shift. IDEX Copy/Mirror doubles productivity without buying a second printer. Open materials reduce filament cost by 5-10x compared to closed systems.
Configuration & Pricing
Ecosystem approach: all three products work as a unified system. FILO feeds dry material to CD400/CD400HT; ProtypeOS provides unified management.
What's Next?
We calculate
the benefit
We analyze your tasks and select the optimal equipment configuration.
We install
and train
A Protype engineer visits on-site, installs the equipment and trains your team.
We support
Technical support, software updates, service and warranty up to 36 months.
Contact us
+375 29 335-41-52 · office@protype.by · t.me/protype_tech · protype.by
LLC «Arkos-Trade» · TIN: 190 421 658