Protype CD400HT
High-Temperature 3D Printing
High-temperature IDEX 3D printer with 2 extruders for printing PEEK, PEKK, ULTEM, and other super polymers. Chamber up to 150 °C, bed up to 250 °C — parts with mechanical properties rivaling metal.
Factors Limiting Additive Manufacturing Efficiency
Material Limitations
Most 3D printers cannot print with PEEK, PEKK, or ULTEM — materials with heat resistance above 250 °C and strength comparable to metal.
Insufficient Chamber Temperature
Super polymers require a chamber temperature of at least 120 °C. Passive heating cannot ensure stability — leading to delamination, warping, and defects.
Material Degradation During Drying
PEEK and PEKK require drying at 120-130 °C. Standard dryers cannot reach the required temperature or maintain proper humidity control.
High Barrier to Entry
High-temperature equipment starts at $150,000+. Closed systems add 10-20x material cost markup.
Protype CD400HT — High-Temperature
3D Printer
IDEX with 2 extruders. Chamber up to 150 °C, bed up to 250 °C, hotend up to 550 °C. Print PEEK, PEKK, ULTEM without compromise.
Compatible with High-Temperature Polymers
Materials that require a chamber temperature of 90 °C+ and hotend of 400 °C+
› Also prints all CD400-compatible materials
CD400 vs CD400HT
CD400HT — a high-temperature IDEX printer for producing PEEK and PEKK parts with heat resistance up to 250 °C and strength on par with aluminum. CD400 — an IDEX printer for serial production with engineering plastics and maximum throughput.
CD400HT — High-Temperature 3D Printing
Manage Your Fleet from Phone or Desktop
Protype Hub — a unified application for monitoring and managing all your printers. Works via secure VPN from anywhere in the world.
Dashboard — temperatures, print status, real-time graphs
FilaCore — spool management, auto change, filament remaining
VPN — secure access without static IP, one-click connection
ProtypeVPN — Secure Remote Access System
An encrypted channel for equipment management without compromising your corporate network.
- Plug & Play — connect the printer to power, and it just works
- Remote Control — from the office, home, or another facility
- Network Protected — your corporate network remains fully isolated
- Rapid Scaling — add new printers in minutes
- Unified Access — scale your fleet across locations with a single entry point
- Invisible from the Internet — all traffic is end-to-end encrypted
ProtypeVPN provides a secure way to manage production without violating your company's security policies. Suitable for defense sector and air-gapped networks.
Protype Hub: All Printers in One Window
Desktop application for macOS / Windows / Linux. No cloud, no open external ports.
- Centralized Management — all printers in a single interface
- Job Submission — upload and print in just a few clicks
- Real-Time Monitoring — status, queue, print history
- Camera & Alerts — 24/7 monitoring from anywhere
ProtypeOS — Proprietary Operating System
Unified interface on a 22" touchscreen for complete print control.
Built-in Slicer
Prepare models and launch prints directly from the printer.
Material Profiles
Pre-configured settings for ABS, PA, PC, TPU, and more.
Queue & Log
Job scheduling and complete print history.
Remote Access
LAN/Wi-Fi — upload models without USB drives.
Roles & Permissions
Operator, engineer, supervisor.
Logging
Full traceability for every printed part.
Enclosed Thermal Chamber for Stable Printing
For ABS, Nylon, PC, and ASA, a stable chamber temperature means no warping and predictable part geometry.
Active heating maintains stable temperature and minimizes the impact of the external environment.
Engineered for continuous operation at chamber temperatures up to 150 °C without wear.
Reduces heat loss through chamber walls and doors, maintaining a stable thermal regime.
Auto leveling, uniform heating up to 250 °C — perfect adhesion for PEEK and PEKK.
Full Technical Specifications
| Hotend Temperature | up to 550°C |
| Nozzle Diameter | 0.3–1.2 mm |
| Print Speed | up to 300 mm/s |
| Volumetric Flow Rate | up to 60 mm³/s |
| XY/Z Accuracy | 5 μm / 2 μm |
| Layer Height | 0.05–0.75 mm |
| Build Volume | 350×350×400 mm |
| Chamber Temperature | up to 150°C |
| Bed Temperature | up to 250°C |
| Bed Surface | Tempered Glass |
| Auto Leveling | Yes |
| Extruder | 2× IDEX HT |
| Max Temperature | 550°C |
| Auto Spool Change | 2×3 kg |
| Auto Nozzle Cleaning | Yes |
| Autonomous Operation | up to 10+ days |
| Monitoring Camera | Built-in |
| Drying Chambers | 2×up to 130°C |
| Humidity Sensor | Yes |
| Active Ventilation | Yes |
| Standard | ABS, PET-G, HIPS, TPU |
| Engineering | PA-6, PA-12, PC, ASA |
| Composite | PA-CF, ABS-CF, CARBEX |
| Super Polymers | PEEK, PEKK, PEI, ULTEM |
| Display | 22" Touchscreen HMI |
| ProtypeOS | LAN, Wi-Fi, VPN |
| Dimensions | 1900×770×1020 mm |
| Weight / Power | 420 kg / 5500 W |
| Warranty | 12 months |
Installation Requirements
No special conditions needed: we reduced the footprint while preserving the full build volume.
Floor
Level and stable surface. Doorway clearance ≥ 80 cm (dimensions: 1,900 x 770 x 1,020 mm).
Electrical
220 V, 50 Hz; dedicated grounded line; peak power up to 5.5 kW; separate outlet for the dryer.
EMI / Interference
Keep high-power devices and cables at least 1-2 m away to avoid electromagnetic interference.
Access & Climate
Approx. 50 cm clearance around the unit for maintenance; standard room ventilation is sufficient.
The printer fits easily in an office and can be transported in a standard elevator
3D Production ROI
High-temperature 3D printing enables replacing metal parts with PEEK/PEKK, reducing weight by 40-60% and cost by an order of magnitude.
CD400HT prints PEEK and PEKK parts with mechanical properties comparable to aluminum, at 40-60% less weight. Open materials reduce filament costs by 5-10x compared to closed systems.
Configurations & Pricing
Ecosystem Approach: all three products work as a unified system. FILO feeds dry material into the CD400/CD400HT; ProtypeOS provides centralized management.
What's Next?
Calculate
Your Savings
We analyze your tasks and select the optimal equipment configuration.
Install &
Train
A Protype engineer visits your site, installs the equipment, and trains your team.
Ongoing
Support
Technical support, software updates, service, and warranty up to 36 months.
Get in Touch
+375 29 335-41-52 · office@protype.by · t.me/protype_tech · protype.by
Arkos-Trade LLC · TIN: 190 421 658